--=BIRTH OF A SAND/DESERT CAR, Brakes Continued=--

More Brake Stuff... It Better Stop Before It can Go!!!! I mounted the brake master cylinder to a plate. Aligned, positioned, drilled holes, bolted the M/C to the plate and then tacked it in place.

I purchased a CNC pedal assembly along with a 7/8 inch, stainless steel, sleeve lined bore, master cylinder. Part Numbers... 705F-7/8,1458 and 250SLMC Plus the tall reservoir and quick fill cap... The bracket will be beefed up

Now that the master cylinder is in place I can figure exactly what I need in hard brake lines to hook the M/C into.

Boxes left over from the mail order delivery....... I love this shit... Beats work anyday!!!!! =:)

Above, I used a hammer and a piece of wood to form the upper and lower edges of the aluminum side panels giving it a cleaner look and bend them around the upper and lower frame rails.......

-[Press here to return to the Build Menu]-

-[Press here to return to Batalias.com Menu page]-