--=BIRTH OF A SAND/DESERT CAR, Rear Shocks and Mounts Part 2=-

Rear Shock Mounts Continued After I mounted the curved parts of the rear upper shock mount towers, I put a cross brace in for strength.

I cut some flat stock and made some raw upper mounts.

Below left is my bandsaw doing the cutting after I drilled some 1.5 in holes in the shock mounts. I tack welded them in place and will grind them to shape on the car later. Below right with everything in place, I rolled the car out of the garage into the daylight for some pics.

-[Press here to return to the Build Menu]-

-[Press here to return to Batalias.com Menu page]-