--=BIRTH OF A SAND/DESERT CAR, Building The RollBar>

Rollbar and Rear End Mount I bent some tubing for the rollbar and rollbar crosspieces. I am NOT a metal fabricator so my expertise is limited but here we go.

Notches and size are the hardest part. Getting everything to fit tight before the weld makes for a stronger frame, structuarally... I thru in part of the rearend mount. Its just a start... When I look at whats available from professionals and what I am doing, I consider myself a true NOVICE at this. But what the hell!!!!

The uprights for the rollbar are tilted 10 degrees inward. Crosspieces were the fabricated and tacked into place. Tape measurements, eyeball and a cold BUD are needed to get everything just right...... U'll be off a little but what the hell. I don't have a $$$$ corp and big $$$$ machinery behind me... What ya see is what ya get. All this is home grown!!!

-[Press here to return to the Build Menu]-

-[Press here to return to Batalias.com Menu page]-